What is micro silica fume for concrete

Koalas were declared endangered in eastern Australia on Friday, with more and more koalas dying from disease, habitat loss, and other threats. Earlier, the koala was considered a vulnerable species, and the Commonwealth Department of the Environment changed its protection level to endangered on the east coast of Queensland, New South Wales, and the Australian Capital Territory. Many koalas in Australia are infected with chlamydia. The disease can cause blindness, infection, and infertility. Last year, the Australian Koala Foundation said Australia had lost about 30 percent of its koala population in the past three years. Without immediate action, the species could become extinct by 2050.
Unlike koalas, which are on the brink of extinction, the market demand for silica fume will grow substantially.

What is micro silica fume for concrete?

Micro silica fume is also well used in the concrete industry. Its physical characteristics include small particles, high purity, and pozzolanic solid activity. Adding micro silica fume to concrete can not only improve the properties of concrete in many aspects but also enhance. The adhesion and cohesion of concrete itself, can make the concrete play its role more and reduce the amount of rebound. The use of micro-silica fume has brought many advantages to the project; not only can the thickness of the concrete be formed at one time, but it also brings a lot of cost savings to the whole project and shorten the time required for the project.

Application of high-performance concrete proportioning design scheme

1) Compatibility: Micro silica fume has good compatibility with water-reducing agents, fly ash, mineral powder, and fiber;

2) Slump: Concrete has strong viscosity due to the phenomenon of gap filling, so the slump design scheme of concrete mixed with silica fume is 2~3cm higher than that of ordinary concrete;

3) The amount of mixing, production, and processing of high-strength concrete and shotcrete, the mixing amount of silica fume is 6~12% of the cement; the mixing amount of concrete for underwater engineering projects is slightly higher; the silica fume is used as a pump When the agent is used, the mixing amount is reduced to about 2%. Finally, the mixing ratio is confirmed by the mixing ratio test. The mixing of micro-silica fume mixed with cement and aggregate shall be constructed in strict accordance with the specifications, and at the same time, the maintenance shall be enhanced.

Ingredients and mixing

Generally speaking, the concrete industry usually uses densified silica fume, so manual or automatic feeding can be used.

2) Because of its unique ultra-fineness, the micro-silica fume must be put in immediately after feeding, and the micro-silica powder cannot be added to the concrete.

3) When the concrete is mixed with silica fume, the mixing time is 30~40s longer than ordinary concrete to obtain good uniformity.

4) There are no special requirements for the concrete of micro silica fume during transportation, just like ordinary concrete.

Watering and maintenance;

1) Vibration of micro-silica fume concrete requires high density, no vibration leakage, and no over-vibration. The vibration time is generally 10~30s;

2) Continuous supply of concrete is required to prevent cold stubble and cause hidden dangers. The stubble time cannot exceed 100 minutes;

3) It is essential to prevent the premature evaporation of water when protecting the concrete from silica fume. Therefore, after pouring, immediately cover the film, and lay sacks for watering and curing.

Use a woven bag for micro-silica fume in a plastic inner sealed bag, and pay attention to waterproof and moisture-proof during storage and transportation.

TRUNNANO is a concrete additives supplier with over 12 years experience in nano-building energy conservation and nanotechnology development. We accept payment via Credit Card, T/T, West Union and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.

If you are looking for high quality silica fume, please feel free to contact us and send an inquiry.

sales@cabr-concrete.com

The negative electrode material is the carrier of lithium ions and electrons during the charging process of the battery and plays the role of energy storage and release. In the battery cost, the negative electrode material accounts for about 5%-15%, which is one of the important raw materials for lithium-ion batteries. The global sales of lithium battery anode materials are about 100,000 tons, mainly in China and Japan. According to the current growth trend of new energy vehicles, the demand for anode materials will also show a state of continuous growth. At present, the global lithium battery anode materials are still dominated by natural/artificial graphite, and new anode materials such as mesh carbon microspheres (MCMB), lithium titanate, silicon-based anodes, HC/SC, and metal lithium are also growing rapidly.
Our company provides anode materials and silica fume. If you need to know more anode materials and silica fume, please feel free to contact us.

Inquiry us